Respirable Dust Sampler

Delivery Time: 1 Week
Supply Ability: 4-5 Per Week
Cooling System: Air Cooling
Product Type: Respirable Dust Sampler
Material: Steel
Voltage: 220 Volt (v)

Respirable Dust Samplers are needed to assess the work-related exposure to gases, dusts and vapors. They have been designed to work by the operator and can be located in the breathing zone. These are the instruments, made for measuring the properties of particulate matter in the ambient air. These can prevent the volatile fraction and allow for good portability. Respirable Dust Samplers we deal in provide noiseless operation. These are also featured with flow recorder and time indicators. They get auto shut off when the flow rate gets dropped. The samplers make no errors that occur due to pressure and temperature changes.

(03)

Respirable Dust Sampler as per BIS with Flow Controller

The APM 460DXNL uses an electronic feedback flow controller with pressure sensor, to automatically maintain constant sampling rate through the filter/cyclone assembly. The size fractionating cyclone of the APM 460DXNL thus operates close to its designed separation velocity resulting in a sharper cut-off for particulates larger than 10 microns. When the dust load on filter becomes excessive and exceeds the capacity of the blower, the electronic circuits provided in the flow controller automatically shut down the machine. (As per BIS IS 5182 Part 23:2006). To compensate for a variation in filter characteristics the flow controller has a provision to allow adjustment of the sampling rate.

Send Inquiry

Request To Call Back